The equipment is used in all areas of industry to reduce the amount of consumed reactive energy by increasing cos φ.
Reducing the current consumption by 30-50%.
Load decrease of distribution circuit elements, extension of their service life.
Increasing of distribution circuit’s transfer capacity and its reliability.
Payment minimization for reactive energy.
Depending on the capacity of power factor compensation module Q-Box series are available in floor-standing or wall-mounted designs.
Doors of boards have hinged or built-in type of lock.
By type of control PFC module of Q-Box series are divided into: – adjustable; – partially adjustable; – non-adjustable.
The power factor compensation equipment are completed with dry self-healing capacitor banks with built-in discharge resistor module for removing residual voltage.
The design of Q-Box module is equipped with a system of natural or automatic forced ventilation, during the installation outside the premises the boards are set with a heating and air conditioning system.
The design of the boards provides convenient and safe connection of the incoming and outgoing lines.
Cabinets made from all-welded metal structures with removable side, upper, back walls and doors.
The metal structure frameworks and removal parts are coated with powder paint RAL 7035 (7032) color.
Standard section height from 800 to 1800 mm, section width 450/1200 mm, section depth from 300 to 800 mm.
Metal thickness – doors, frame 2 mm, side, back and upper walls – 1,2 – 1,5 mm.
Need individual configuration?
Fill in the questionnaire to order the equipment and send us for a miscalculation.
Fill the form
and our specialists will contact you within 30 minutes